The classic charm of coastal, country and modern interiors.

Lake house. Farm house. Beach house. BeadBoard is incredibly versatile—equally at home in just about any environment. A traditional American favorite for walls, ceilings, backsplashes, wainscoting, covered porches and more.

The faithfully reproduced, authentically milled, solid pine, tongue & groove boards in our BeadBoard Collection make it easy to bring visual interest and timeless appeal to your space—prefinished and ready to install.




What makes the Great American Spaces BeadBoard Collection better than our competitors?

  • Our BeadBoard Collection is precisely milled with classic, deep grooves you won’t find in paneled imitations.
  • Our BeadBoard Collection is prefinished, tongue & groove planks. This ensures that the wall/ceiling surface behind the planks does not peek through, and the tongue is completely prefinished so small spacing/gaps between planks are not noticeable. This eliminates contractor callbacks to re-paint/re-stain due to normal shrinkage when you use an unfinished product.
  • Our proprietary prefinishing process authentically replicates the texture and charm of this classic favorite.
  • Our finishes are eco-friendly using a safe, water-based finish and require low-to-no maintenance.
  • It is proudly made in the USA in Grand Rapids, Michigan.

Can BeadBoard be installed on ceilings?

Yes, BeadBoard can be installed on walls, ceilings and more. Follow installation instructions found in the Installation Guide tab above.

Can BeadBoard be installed on fireplace walls?

Always follow local codes. As long as the immediate surrounding of the fireplace opening is non-flammable, BeadBoard can be installed around it.

Is BeadBoard raw pine or is it prefinished?

Our BeadBoard Collection is pine that is prefinished in 4 colors. There is no need to hire a contractor to paint/stain. Simply install the product according to the installation instructions found in the Installation Guide tab above and your project is complete.

Can BeadBoard be installed directly to the studs and skip the drywall step?

Yes, with our tongue & groove profile, the surface behind the planks will not peek through, however certain municipalities still require drywall in order to meet local building codes.

Can BeadBoard be installed directly over my drywall?

Yes, but BeadBoard is 5/8 in thick, so you need to take into consideration your interior window and door trim so as not to lose the shadow line if it has thin reveal. Installation instructions can be found in the Installation Guide tab above, with nailing directly into studs as the recommended installation.

Does Great American Spaces offer a product warranty on BeadBoard?

No, our products should never be exposed to the weather, so there is no need for a warranty.

Does BeadBoard require maintenance when used inside?

BeadBoard is a low-to-no-maintenance product when used inside. As with all wood products, you will experience slight color change over time.

Can BeadBoard be used as siding or in other areas that are exposed to the weather?

No, BeadBoard is not recommended for exterior siding or areas exposed to the weather.

Where can BeadBoard be used?

BeadBoard can be used on dry porch ceilings, interior walls and ceilings, wainscoting, fireplace surrounds, accent walls, bar wraps, interior barn doors and more. It’s not intended for use on floors, exposed outdoor surfaces or in areas with high humidity or contact with water.

Is matching trim available?

Yes, matching trim is available for our BeadBoard Collection. The trim comes in 8 ft lengths. The actual thickness is 11/16 in and the width is approximately 3-1/2 in.

Is a touch-up kit available?

Not at this time. If you must do touch up, match the finish color and sheen at a paint store. Always do a color test in an inconspicuous area to make sure the match is acceptable before proceeding.

Can BeadBoard be installed both vertically and horizontally?

Yes, BeadBoard can be installed both vertically and horizontally, according to your preference.

What is the best way to clean BeadBoard?

Dust with a soft cloth or vacuum using a soft brush attachment.


Style BeadBoard
Plank Size* 1 x 4 in
Plank Length 12 ft
Type Solid pine tongue & groove
Edge Profile Beaded-edge
Coverage 3.125 sq ft per board
Matching Trim 1 x 4 in x 8 ft
Palettes/Colors • Coastal White
• Driftwood
• Espresso
• Spiced Rum

*All dimensions are nominal.

Installation Guide

All our products are designed for fast, easy installation by both professional and DIY installers. Compared to similar reclaimed or unfinished wood planking, Great American Spaces products install in about one-third the time and half the cost.

How much do you need?

Want to calculate it yourself?

square footage to cover + 10% for waste/trim ÷ coverage per board

We used it on our kitchen ceiling. It is so beautiful. Love it!

Jodie S. LA

Great product. We installed on the ceiling of a basement “man cave” and it looks great.

Tom W. PA


Our Collections